This article has multiple issues. Please help improve it or discuss these issues on the talk page. (Learn how and when to remove these template messages) This article needs additional citations for verification. Please help improve this article by adding citations to reliable sources. Unsourced material may be challenged and removed. Find sources: "Electric bicycle" – news · newspapers · books · scholar · JSTOR (December 2023) (Learn how and when to remove this template message) This article relies excessively on references to primary sources. Please improve this article by adding secondary or tertiary sources. Find sources: "Electric bicycle" – news · newspapers · books · scholar · JSTOR (December 2023) (Learn how and when to remove this template message) (Learn how and when to remove this template message)

Part of a series on
Sustainable energy
Energy conservation Arcology Building insulation Cogeneration Eco hotel Efficient energy use Energy storage Environmental planning Environmental technology Fossil fuel phase-out Green building Green building and wood Heat pump List of low-energy building techniques Low-energy house Microgeneration Sustainable architecture Sustainable city Sustainable habitat Sustainable refurbishment Thermal energy storage Tropical green building Zero-energy building Zero heating building
Renewable energy Biofuel Sustainable Biogas Biomass Carbon-neutral fuel Geothermal Hydropower Hydroelectricity Marine energy Tidal Renewable energy transition Renewable heat Solar Wave Wind
Sustainable transport Green vehicle Electric vehicle Bicycle Solar vehicle Wind-powered vehicle Hybrid vehicle Human-electric Twike Plug-in Human-powered transport Helicopter Hydrofoil Land vehicle Bicycle Cycle rickshaw Kick scooter Quadracycle Tricycle Velomobile Roller skating Skateboarding Walking Watercraft Personal transporter Rail transport Tram Rapid transit Personal rapid transit
Category  Renewable energy portal
v t e

An electric bicycle (e-bike, eBike, etc.) is a motorized bicycle with an integrated electric motor used to assist propulsion.^[2][3] Many kinds of e-bikes are available worldwide, but they generally fall into two broad categories: bikes that assist the rider's pedal-power (i.e. pedelecs) and bikes that add a throttle, integrating moped-style functionality. Both retain the ability to be pedaled by the rider and are therefore not electric motorcycles. E-bikes use rechargeable batteries and typically are motor-powered up to 25 to 32 km/h (16 to 20 mph). High-powered varieties can often travel more than 45 km/h (28 mph).

Depending on local laws, many e-bikes (e.g., pedelecs) are legally classified as bicycles rather than mopeds or motorcycles. This exempts them from the more stringent laws regarding the certification and operation of more powerful two-wheelers which are often classed as electric motorcycles, such as licensing and mandatory safety equipment. E-bikes can also be defined separately and treated under distinct electric bicycle laws. In UK legislation the vehicles are called electrically assisted pedal cycles (EAPC), in EU legislation electrically power assisted cycles (EPAC).^[4]

History

1890s to 1980s

In the 1890s, electric bicycles were documented within various U.S. patents. For example, on 31 December 1895, Ogden Bolton Jr. was granted a patent for a battery-powered bicycle with "6-pole brush-and-commutator direct current (DC) hub motor mounted in the rear wheel" (U.S. patent 552,271). There were no gears and the motor could draw up to 100 amperes from a 10-volt battery.^[5]

Two years later, in 1897, Hosea W. Libbey of Boston invented an electric bicycle (U.S. patent 596,272) that was propelled by a "double electric motor". The motor was designed within the hub of the crankset axle.^[6] (This model was later re-invented and imitated in the late 1990s by Giant Lafree e-bikes.)

By 1898, a rear-wheel drive electric bicycle, which used a driving belt along the outside edge of the wheel, was patented by Mathew J. Steffens. An 1899 patent by John Schnepf (U.S. patent 627,066) depicted an electric bicycle with a rear-wheel friction, "roller-wheel"-style drive.^[7] In 1969, Schnepf's invention was expanded by G. A. Wood Jr. (U.S. patent 3,431,994). Wood's device used four fractional horsepower motors connected through a series of gears.^[8]

This section needs expansion. You can help by adding to it. (March 2023)

E-bikes since the 1980s

From 1992, Vector Services Limited offered the Zike e-bike.^[9] The bicycle included NiCd batteries that were built into a frame member and included an 850 g permanent-magnet motor.

Torque sensors and power controls were developed during the late 1990s. For example, a Japanese patent (6163148) was granted in 1997 to a team led by Yutaka Takada,^[10] for a "Sensor, drive force auxiliary device ... and torque sensor zero point adjusting mechanism".

American car executive Lee Iacocca founded EV Global Motors in 1997, a company that produced an electric bicycle model named E-bike SX, and it was one of the early efforts to popularize e-bikes in the US.^[11]

By 2007, e-bikes were thought to make up 10 to 20 percent of all two-wheeled vehicles on the streets of many major Chinese cities.^[12] A typical unit requires eight hours to charge the battery, which provides the range of 25 to 30 miles (40 to 48 km),^[12] at the speed of around 20 km/h (12 mph).^[13]

Gallery

• 
  E-bike 1932 (by Philips & Simplex)
• 
  A bike equipped with an after market electric hub motor conversion kit, with the battery pack placed on the rear carrier rack
• 
  Brushless DC electric motor (BLDC) bicycle hub motor

Classes

E-bikes are classed according to the power that their electric motor can deliver and the control system, i.e., when and how the power from the motor is applied. Also the classification of e-bikes is complicated as much of the definition is due to legal reasons of what constitutes a bicycle and what constitutes a moped or motorcycle. As such, the classification of these e-bikes varies greatly across countries and local jurisdictions.

Despite these legal complications, the classification of e-bikes is mainly decided by whether the e-bike's motor assists the rider using a pedal-assist system or by a power-on-demand one. Definitions of these are as follows:

• With pedal-assist, the electric motor is regulated by pedalling. The pedal-assist augments the efforts of the rider when they are pedalling. These e-bikes – called pedelecs – have a sensor to detect the pedalling speed, the pedalling force, or both. Brake activation is sensed to disable the motor as well.
• With power-on-demand, the motor is activated by a throttle, usually handlebar-mounted just like on most motorcycles or scooters.

Therefore, very broadly, e-bikes can be classed as:

• E-bikes with pedal-assist only: either pedelecs (legally classed as bicycles) or S-Pedelecs^[14] (often legally classed as mopeds)
  • Pedelecs: have pedal-assist only, motor assists only up to a decent but not excessive speed (usually 25 km/h or 16 mph), motor power up to 250 W (0.34 hp), often legally classed as bicycles
  • S-Pedelecs: have pedal-assist only, motor power can be greater than 250 W (0.34 hp), can attain a higher speed (e.g., 45 km/h or 28 mph)) before motor stops assisting, sometimes legally classed as a moped or motorcycle.
• E-bikes with power-on-demand and pedal-assist
• E-bikes with power-on-demand only frequently have more powerful motors than pedelecs. The more powerful of these are legally classed as mopeds or motorcycles, but may not meet the legal requirements for registration as street-legal motorcycles.

Pedal-assist only

E-bikes with pedal-assist only are usually called pedelecs but can be broadly classified into pedelecs proper and the more powerful S-Pedelecs.

Pedelecs

The term "pedelec" (from pedal electric cycle) refers to a pedal-assist e-bike with a relatively low-powered electric motor and a decent but not excessive top speed. Pedelecs are legally classed as bicycles rather than low-powered motorcycles or mopeds.

The most influential definition of pedelecs comes from the EU. EU directive (EN15194 standard) for motor vehicles considers a bicycle to be a pedelec if:

• The pedal-assist, i.e. the motorised assistance that only engages when the rider is pedalling, cuts out once

1. 25 km/h (16 mph) is reached, and
2. when the motor produces maximum continuous rated power of not more than 250 W (0.34 hp) (n.b. the motor can produce more power for short periods, such as when the rider is struggling to get up a steep hill).

An e-bike conforming to these conditions is considered to be a pedelec in the EU and is legally classed as a bicycle. The EN15194 standard is valid across the whole of the EU and has been adopted by some non-EU European nations including the UK,^[15] and also some non-European jurisdictions (such as the state of Victoria in Australia).^[16]

Pedelecs are much like conventional bicycles in use and function—the electric motor only provides assistance, for example, when the rider is climbing or struggling against a headwind. Pedelecs are therefore especially useful for people in hilly areas where riding a bike would prove too strenuous for many to consider taking up cycling as a daily means of transport. They are also useful for riders who more generally need some assistance, e.g. for people with heart, leg muscle or knee joint issues.

S-Pedelecs

More powerful pedelecs which are not legally classed as bicycles are dubbed S-Pedelecs (short for Schnell-Pedelecs, i.e. Speedy-Pedelecs) in Germany. These have a motor more powerful than 250 W (0.34 hp) and less limited, or unlimited, pedal-assist, i.e. the motor does not stop assisting the rider once 25 km/h (16 mph) has been reached. S-Pedelec class e-bikes are therefore usually classified as mopeds or motorcycles rather than as bicycles and therefore may (depending on the jurisdiction) need to be registered and insured, the rider may need some sort of driver's license (either car or motorcycle) and motorcycle helmets may have to be worn.^[17] In the United States, many states have adopted S-Pedelecs into the Class 3 category, limited to not more than 750 W (1.01 hp) of power and 28 mph (45 km/h) speed.^[18] In Europe they are likely to be classed as mopeds requiring a registration plate and a licensed driver.^[19]

Power-on-demand and pedal-assist

Some newer electric bikes include a pedal assist system (PAS) with or without throttle, allowing riders to pedal while using the electric motor to increase range. There are electric propulsion conversion kits for ordinary bicycles.^{[citation needed]}

Power-on-demand only

Some e-bikes have an electric motor that operates on a power-on-demand basis only; the motor is engaged and operated manually using a throttle, with control usually on the handgrip as on a motorbike or scooter. These sorts of e-bikes often, but not always, have more powerful motors than pedelecs.

With power-on-demand only e-bikes the rider can:

1. ride by pedal power alone, i.e. fully human-powered.
2. ride by electric motor alone by operating the throttle manually.
3. ride using both together at the same time.

Some power-on-demand only e-bikes are very different from, and cannot be classified as, bicycles. For example, the Noped is a term used by the Ministry of Transportation of Ontario for e-bikes which are not fitted with pedals.

Legal status

(*) Allowed on bike paths when electric systems are turned off
(**) E-bikes are illegal in this region
(***) Some regions have special regulations, see corresponding entry under Electric bicycle laws.

Gallery

• 
  E-bikes and electric scooters in a specialized shop in Beijing in 2008. (Y2750 is around US$400.)
• 
  E-bikes are common in China, with an estimated fleet of 120 million in early 2010.^[48]
• 
  Hybrid bicycle speedometer with integrated battery level measurement
• 
  Yellow electric bike on West 54th Street
• 
  e-Bikes in Split, Croatia
• 
  E-bikes in Berlin

Popularity

E-bike usage worldwide has experienced rapid growth since 1998.^[48] China is the world's leading producer of e-bikes. According to the data of the China Bicycle Association, a government-chartered industry group, in 2004 China's manufacturers sold 7.5 million e-bikes nationwide, which was almost twice the year 2003 sales;^[13] domestic sales reached 10 million in 2005, and 16 to 18 million in 2006.^[12] In 2016, approximately 210 million electric bikes were used daily in China.^[49]

According to trade umbrella body CONEBI, electric bike sales in the EU were over 5 million in 2021,^[50] up from 2 million e-bikes in 2016,^[49] up from 700,000 in 2010 and 200,000 in 2007.^[51] In 2019, the EU implemented a 79.3% protective tariff on imported Chinese e-bikes to protect EU producers.^[52] In 2022, electric bikes continued to grow market share in the EU, rising to 57% of bike sales in the Netherlands, 49% in Austria, 48% in Germany and 47% in Belgium.^[53]

Technical

Motors and drivetrains

The two most common types of motors used in electric bicycles are brushed and brushless. Many configurations are available, varying in cost and complexity; direct-drive and geared motor units are both used. An electric power-assist system may be added to almost any pedal cycle using chain drive, belt drive, hub motors or friction drive. Brushless hub motors are the most common in modern designs. The motor is built into the wheel hub itself, while the stator is fixed solidly to the axle, and the magnets are attached to and rotating with the wheel. The bicycle wheel hub is the motor. The power levels of motors used are influenced by available legal categories and are often, but not always limited to under 750 watts. With a front-drive the motor sits in the front hub, and with a rear-drive the motor sits in the rear hub.

Another type of electric assist motor, often referred to as the mid-drive system, is increasing in popularity.^[when?] With this system, the electric motor is not built into the wheel but is usually mounted near (often under) the bottom bracket shell. In more typical configurations, a cog or wheel on the motor drives a belt or chain that engages with a pulley or sprocket fixed to one of the arms of the bicycle's crankset. Thus, the propulsion is provided at the pedals rather than at the wheel, being eventually applied to the wheel via the bicycle's standard drive train. Freewheel crank, that is a freewheel in the bottom bracket, is a necessary part in mid-drive systems to allow the electric motor to work inside its optimal rotational speed range (r/min).

Because the power is applied through the chain and sprocket, power is typically limited to around 250–500 watts to protect against fast wear on the drivetrain. An electric mid-drive combined with an internal gear hub at the back hub may require care due to the lack of a clutch mechanism to soften the shock to the gears at the moment of re-engagement. A continuously variable transmission or a fully automatic internal gear hub may reduce the shocks due to the viscosity of oils used for liquid coupling instead of the mechanical couplings of the conventional internal gear hubs.^[54]

The main advantage mid-drive motors have over hub motors is that power is applied through the chain (or belt) and thus it uses the existing rear gears (either external or internal). This allows for the motor to operate more efficiently at a wider range of vehicle speeds. Without using the bicycle's gears, equivalent hub motors tend to be less effective propelling the ebike slowly up steep hills and also propelling the ebike fast on the flat.

Batteries

E-bikes use rechargeable batteries in addition to electric motors and some form of control. Battery systems in use include sealed lead–acid (SLA), nickel–cadmium (NiCad), nickel–metal hydride (NiMH) or lithium-ion polymer (Li-ion). Batteries vary according to the voltage, total charge capacity (amp hours), weight, the number of charging cycles before performance degrades, and ability to handle over-voltage charging conditions. The energy costs of operating e-bikes are small, but there can be considerable battery replacement costs. The lifespan of a battery pack varies depending on the type of usage. Shallow discharge/recharge cycles help extend the overall battery life.

Range is a key consideration with e-bikes, and is affected by factors such as motor efficiency, battery capacity, efficiency of the driving electronics, aerodynamics, hills and weight of the bike and rider.^[55][56] Some manufacturers, such as the Canadian BionX or American Vintage Electric Bikes,^[57] have the option of using regenerative braking, the motor acts as a generator to slow the bike down prior to the brake pads engaging.^[58] This is useful for extending the range and the life of brake pads and wheel rims. There are also experiments using fuel cells. e.g. the PHB. Some experiments have also been undertaken with super capacitors to supplement or replace batteries for cars and some SUVS. E-bikes developed in Switzerland in the late 1980s for the Tour de Sol solar vehicle race came with solar charging stations but these were later fixed on roofs and connected so as to feed into the electric mains.^[59] The bicycles were then charged from the mains, as is common today. While e-bike batteries were produced mainly by bigger companies in past, many small to medium companies have started using new methods for creating more durable batteries.^{[citation needed]}

Lithium ion batteries used in e-bikes and related vehicles such as electric scooters have been under scrutiny since 2019 due to their susceptibility to overheating and catching fire. A rise in incidents where e-bike batteries were implicated in fires has been attributed to increases in popularity and lack of regulations.^[60] Lower-quality batteries are more likely to be manufactured with defects that can cause bulging or bursting. Gig workers who rely on using e-bikes to do their jobs may also be limited in their choice of vehicle and purchase a cheap or second-hand e-bike that is more prone to damage.^[61] Some jurisdictions, such as New York City and San Francisco, have passed laws requiring that all electric mobility devices sold have UL safety certifications.^[62][63]

Design variations

Not all e-bikes take the form of conventional push-bikes with an incorporated motor, such as the Cytronex bicycles which use a small battery disguised as a water bottle.^[64][65] Some are designed to take the appearance of low capacity motorcycles, but smaller in size and consisting of an electric motor rather than a petrol engine. For example, the Sakura e-bike incorporates a 200 W motor found on standard e-bikes, but also includes plastic cladding, front and rear lights, and a speedometer. It is styled as a modern moped, and is often mistaken for one.^{[citation needed]}

Converting a non-electric bicycle to its electric equivalent can be complicated but numerous 'replace a wheel' solutions are now available on the market.^[66]

An Electric Pusher Trailer is an e-bike design which incorporates a motor and battery into a trailer that pushes any bicycle. One such trailer is the two-wheeled Ridekick. Other, rarer designs include that of a 'chopper' styled e-bike, which are designed as more of a 'fun' or 'novelty' e-bike than as a purposeful mobility aid or mode of transport.^{[citation needed]}

Electric cargo bikes allow the rider to carry large, heavy items which would be difficult to transport without electric power supplementing the human power input.^[67] These bikes can also allow for adults to continue biking into parenthood, enabling the transportation of children without using a car.^[68]

There are many e-bikes design variations available, some with batteries attached to the frame, some housed within the tube. Some use fat tires for improved stability and off-road capability.^[69]

Various designs (including those mentioned above) are designed to fit inside most area laws, and the ones that contain pedals can be used on roads in the United Kingdom, among other countries.^[70]

Folding e-bikes are also available.^[71]

Electric self-balancing unicycles do not conform to e-bike legislation in most countries and therefore cannot be used on the road,^[72] but may be legal to use on the sidewalk. They are the cheapest electric cycles and used by the last mile commuters, for urban use and to be combined with public transport, including buses. They are not legal for use on the public highway (including footways and cycle paths) in the United Kingdom.^[73]

Tricycles

Electric trikes have also been produced that conform to the e-bike legislation. These have the benefit of additional low speed stability and are often favored by people with disabilities. Cargo carrying tricycles are also gaining acceptance, with a small but growing number of couriers using them for package deliveries in city centres. Latest designs of these trikes resemble a cross-between a pedal cycle and a small van.^[74]

• 
  Diagram illustrating a standard bicycle converted to an e-bike using a retail conversion kit
• 
  A folding e-bike
• 
  A modern electric cargo trike in use in London, with a payload of up to 250 kg (550 lb)

Health effects

E-bike use was shown to increase the amount of physical activity. E-bike users in seven European cities had 10% higher weekly energy expenditure than other cyclists because they cycled longer trips.^[75]

E-bikes can also provide a source of exercise for individuals who have trouble exercising for an extended time (due to injury or excessive weight, for example) as the bike can allow the rider to take short breaks from pedaling and also provide confidence to the rider that they'll be able to complete the selected path without becoming too fatigued^[76] or without having forced their knee joints too hard (people who need to use their knee joints without wearing them out unnecessarily may in some electric bikes adjust the level of motor assistance according to the terrain). A University of Tennessee study provides evidence that energy expenditure (EE) and oxygen consumption (VO₂) for e-bikes are 24% lower than that for conventional bicycles, and 64% lower than for walking. Further, the study notes that the difference between e-bikes and bicycles are most pronounced on the uphill segments.^[77]

There are individuals who claim to have lost considerable amounts of weight by using an electric bike.^[78] A recent prospective cohort study however found that people using e-bikes have a higher BMI than those using conventional bikes.^[79] By making the biking terrain less of an issue, people who would not otherwise consider biking can use the electric assistance when needed and otherwise pedal as they are able.^[80] E-bikes can be a useful part of cardiac rehabilitation programmes, since health professionals will often recommend a stationary bike be used in the early stages of these. Exercise-based cardiac rehabilitation programmes can reduce deaths in people with coronary heart disease by around 27%.^[81]

Road traffic safety

Schleinitz et al. (2014) concluded that e-bike users in Germany were no more likely than conventional cyclists to be involved in "safety-critical situations". However, Dozza et al. (2015) concluded (from an analysis of Swedish cyclists) that e-bikers may be involved in more critical incidents but with "lower severity". Additionally, e-bikers were less likely to have dangerous interactions with motorized vehicles.^[82]

Environmental effectsedit

E-bikes are zero-emissions vehicles, as they emit no combustion by-products, but the environmental effects of electricity generation and power distribution and of manufacturing and recycling batteries^[83] must be accounted for. E-bikes emit similar pollutants per kilometer as buses, with emission rates several times lower than motorcycles and cars.^[84][85] E-bikes are generally seen as environmentally desirable in an urban environment.^[86][87]

A 2018 study in England found that e-bikes, if used to replace car travel, have the capability to "cut car carbon dioxide (CO₂) emissions in England by up to 50% (about 30 million tonnes per year)".^[88] Zdroj:https://en.wikipedia.org?pojem=Electric_bicycle
Text je dostupný za podmienok Creative Commons Attribution/Share-Alike License 3.0 Unported; prípadne za ďalších podmienok. Podrobnejšie informácie nájdete na stránke Podmienky použitia.